spacer spacer spacer spacer
Kaydon Bearings spacer spacer

800.514.3066

customer service
spacer
spacer

Kaydon Endurakote®-plated bearings

ND series
Type C – radial contact

A Conrad assembled bearing designed primarily for application of radial load—deep ball grooves also permit application of some thrust load in either direction—often used in conjunction with another bearing.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

 spacer

 
Log in to access 3D models,
CAD files, and engineering software
 
Forgot password?  |  Register
Kaydon
part
number		 Dimensions in Inches Capacities (lbs)1 Approx.
weight
(lbs)
Bore Outside
dia.		 Land
dia.
L1		 Land
dia.
L2		 Dynamic Static2
Kaydon
radial		 ISO
radial3		 Radial
ND040CP0 3.9998 5.0003 4.370 4.630 1,755 3,523 3,080 0.780
ND042CP0 4.2498 5.2503 4.620 4.880 1,787 3,556 3,190 0.830
ND045CP0 4.4998 5.5003 4.870 5.130 1,861 3,671 3,420 0.880
ND047CP0 4.7498 5.7503 5.120 5.380 1,892 3,701 3,530 0.940
ND050CP0 4.9998 6.0003 5.370 5.630 1,964 3,808 3,760 1.000
ND055CP0 5.4998 6.5003 5.870 6.130 2,063 3,937 4,100 1.060
ND060CP0 5.9998 7.0003 6.370 6.630 2,160 4,059 4,450 1.160
ND065CP0 6.4998 7.5003 6.870 7.130 2,254 4,174 4,790 1.220
ND070CP0 6.9998 8.0003 7.370 7.630 2,345 4,284 5,130 1.310
ND075CP0 7.4998 8.5003 7.870 8.130 2,434 4,388 5,470 1.410
ND080CP0 7.9998 9.0003 8.370 8.630 2,520 4,489 5,810 1.530
ND090CP0 8.9998 10.0003 9.370 9.630 2,688 4,678 6,500 1.720
ND100CP0 9.9998 11.0003 10.370 10.630 2,847 4,855 7,180 1.880
ND110CP0 10.9998 12.0003 11.370 11.630 3,000 5,021 7,870 2.060
ND120CP0 11.9998 13.0003 12.370 12.630 3,148 5,178 8,550 2.250
ND140CP0 13.9998 15.0003 14.370 14.630 3,427 5,469 9,920 2.730
ND160CP0 15.9998 17.0003 16.370 16.630 3,688 5,736 11,290 3.100
ND180CP0 17.9998 19.0003 18.370 18.630 3,933 5,982 12,650 3.480
ND200CP0 19.9998 21.0003 20.370 20.630 4,164 6,212 14,020 3.850
ND210CP0 20.9998 22.0003 21.370 21.630 4,274 6,321 14,706 4.040
ND250CP0 24.9998 26.0003 25.370 25.630 4,689 6,729 17,440 4.790
ND300CP0 29.9998 31.0003 30.370 30.630 5,153 7,186 20,860 5.730
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in the Kaydon Reali-Slim® bearing catalog. Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 ISO Radial ratings are calculated per ISO 281:1990. They are included for comparison only.
4 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.

 
Related pages
ND series, type A
ND series, type X
Thin section bearing selector
Endurakote®-plated bearings part number codes
Reali-Design® engineering software

Related downloads
Kaydon Reali-Slim® bearing catalog (Adobe PDF)

Adobe Acrobat Reader

 spacer spacer

Snap-over separator
1/4" balls

ND series, type C - radial contact, bearing profile

4F = 0.060
Bearing corners are
normally chamfered