spacer spacer spacer spacer
Kaydon Bearings spacer spacer

800.514.3066

customer service
spacer
spacer

Kaydon Reali-Slim MM® metric bearings

8 mm series (double sealed)
Type C – radial contact

A Conrad assembled bearing designed primarily for application of radial load—deep ball grooves also permit application of some thrust load in either direction—often used in conjunction with another bearing.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

 spacer

 
Log in to access 3D models,
CAD files, and engineering software
 
Forgot password?  |  Register
Kaydon
part
number		 Dimensions in mm Capacities (Newtons)1 Limiting
speeds
(RPM)*		 Torque
max.
no load
(N-m)4		 Approx.
weight
(kg)
Bore Outside
dia.		 Land
dia.
L1		 Land
dia.
L2		 Dynamic Static2
Kaydon
radial		 ISO
radial3		 Radial
J02508CP0 25 41 31.55 34.42 2501 4686 2971 5580 0.02 0.06
J05008CP0 50 66 56.55 59.42 3432 6200 5452 3180 0.04 0.08
J06008CP0 60 76 66.55 69.42 3766 6645 6433 2710 0.05 0.09
J07008CP0 70 86 76.55 79.42 4089 7041 7433 2360 0.07 0.10
J08008CP0 80 96 86.55 89.42 4393 7399 8424 2090 0.09 0.11
J09008CP0 90 106 96.55 99.42 4688 7728 9405 1880 0.12 0.13
J10008CP0 100 116 106.55 109.42 4972 8034 10405 1700 0.15 0.14
J11008CP0 110 126 116.55 119.42 5237 8319 11395 1560 0.18 0.15
J12008CP0 120 136 126.55 129.42 5502 8588 12376 1440 0.22 0.16
J13008CP0 130 146 136.55 139.42 5766 8843 13376 1330 0.26 0.17
J14008CP0 140 156 146.55 149.42 6011 9085 14367 1240 0.30 0.18
J15008CP0 150 166 156.55 159.42 6257 9317 15347 1160 0.35 0.20
J16008CP0 160 176 166.55 169.42 6492 9538 16338 1090 0.40 0.20
J17008CP0 170 186 176.55 179.42 6727 9751 17328 1030 0.46 0.20
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in the Kaydon Reali-Slim® bearing catalog. Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 ISO Radial ratings are calculated per ISO 281:1990. They are included for comparison only.
4 Torque figures shown are for single bearings with standard lubricant at room temperature and under 5 pounds thrust load.
5 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.
* Values apply to bearings loaded up to 20% of their dynamic capacity.
 
Sealed series bearings are supplied with general purpose grease, satisfactory for operating temperatures of -65°F to +250°F (-54°C to +121°C). Other lubricants are available on special order.

 
Related pages
8 mm series (double sealed), type X
Thin section bearing selector
Reali-Slim MM® metric bearings part number codes
Reali-Design® engineering software

Related downloads
Kaydon Reali-Slim® bearing catalog (Adobe PDF)

Adobe Acrobat Reader

 spacer spacer

Snap-over separator
5/32" balls

8 mm series (double sealed), type C - radial contact, bearing profile

5F = 0.8
Bearing corners are
normally chamfered